Items for
all scales
|
Code |
Quantity |
Price |
Item |
Description |
More info? |
|
MM1 |
1 |
5.99 |
"Constructing & Operating Semaphore Signals" by Mick Nicholson |
64pp, with many drawings and prototype and model photographs, some in colour. Focuses on 4mm scale signals, describing how to achieve the same results as this well-known signal builder |
|
|
GLAZ |
2 |
5.00 |
Acrylic glazing |
200x70x0.5mm cast acrylic clear sheet for glazing coaches, locos, buildings etc |
|
|
LENS |
4 |
2.50 |
Spectacle glazing |
Ruby, amber, blue-green & green stable film for correct aspects with yellow or white lighting |
|
|
MICROGLAZE |
¾ oz. |
4.25 |
Liquid glazing |
Ideal for smaller signal spectacles - dries clear, so use a felt tip pen for the colour. Also suitable for small windows on locos, rolling stock etc. Available only at exhibitions, and not by mail order |
|
|
PASTELS |
12 |
4.00 |
Weathering pastels |
Box of 12 assorted artists' pastels for simple, rapid weathering of all items. If purchasing by mail order, please note that the pastel sticks will probably break in the post, but can still be used. |
|
|
1 pair |
1.25 |
White cotton gloves |
Pair of white cotton gloves, to prevent fingermarks when handling and weathering models |
|
|
|
BRUSH/S |
1 |
1.55 |
No.4 size hog
bristle brush |
Stiff brushes for use with pastels - help to work colour into the item being weathered |
|
|
GSA |
1 |
5.00 |
9cc tube of Perspex adhesive |
For fixing GLAZ and LENS - precision hypodermic applicator, non-stringing & non-fogging |
|
|
TCB |
1 |
3.00 |
Track cleaning block |
For track cleaning, finishing of turnout switch blades etc |
|
|
12" |
3.00 |
1/32" tubing & 0.45mm brass wire |
For signal arm/balance weight bearings in 2 & 3mm scales (this may be packed as 2 x 6" lengths, to avoid damage in the post) |
|
|
|
T116 |
12" |
1.50 |
1/16" brass tubing & 0.8mm brass rod |
For signal arm bearings in 4mm scale |
|
|
T200 |
10" |
1.50 |
2.0mm brass tubing & 1.0mm brass rod |
For signal arm bearings in 7mm scale |
|
|
T200A |
10" |
1.25 |
2.0mm thin-wall brass tubing |
For 5½" diameter tubular posts in 4mm scale (replaces T564) |
|
|
T250 |
10" |
1.25 |
2.5mm brass tubing |
For 6½" diameter tubular posts in 4mm scale (replaces T332) |
|
|
T18 |
12" |
1.25 |
1/8" brass tubing |
For 10" diameter tubular posts in 4mm scale, and 5½" diameter in 7mm scale |
|
|
T532 |
12" |
1.50 |
5/32" brass tubing |
For 6½" diameter tubular posts in 7mm scale |
|
|
T316 |
12" |
1.50 |
3/16" brass tubing |
For 10" diameter tubular posts in 7mm scale, and 5½" diameter in 10mm scale |
|
|
W031 |
12" |
0.30 |
0.31mm brass wire |
For 4mm scale signal operating wires/rods |
|
|
W045 |
12" |
0.30 |
0.45mm brass wire |
For 7mm scale signal operating wires/rods |
|
|
SW024 |
2m |
2.00 |
0.24mm steel wire |
Three-strand steel wire, for use as signal post guy wires and similar applications |
|
|
BAD |
2 pairs |
6.50 |
Baseboard alignment dowels |
Cast dowels for precise, repeatable baseboard alignment |
|
|
FOAM3 |
0.5m² |
4.75 |
3mm thick foam underlay |
1.0 x 0.5m (approx) rolled sheet. The 3mm version is most suitable for 4mm scale trackbeds, whilst the 5mm version is better for 7mm scale. Both are available only at exhibitions, and not by mail order |
|
|
S116S |
1 |
2.05 |
Thin sheet cork underlay |
Roll of 1/16” thick cork, 36 x 12" (by Javis). 24" wide rolls (£4.00) are available at exhibitions. |
|
|
S18S |
1 |
4.00 |
Thick sheet cork underlay |
As above, but 2.5mm thick (by Javis). 24" wide rolls (£7.75) are available at exhibitions. |
|
|
1209 |
36" |
4.29 |
Fine chain |
24 links per inch brass chain (by Slater's) |
|
|
1220 |
10 x 6" |
3.22 |
Phosphor bronze strip |
1/16 x 0.005" phosphor bronze strip. Ideal for loco pickups etc. (by Slater's) |
|
|
SMOKEOIL |
50ml |
8.75 |
Smoke oil |
For locos and accessories with electric heating elements; in bottle with fine nozzle (by Seuthe) |
|
|
OILER |
5ml |
3.99 |
Precision oiler |
Needle point applicator for oiling mechanisms etc. |
|
|
GREASE |
13g |
5.80 |
Gear train grease |
For lubricating worm and gear mechanisms (by Trix) |
|
|
PARAFILM |
2" x 25m |
5.99 |
Parafilm® masking tape |
Moulds easily to complex shapes & raised detail; also ideal for sealing open paint tins etc. |
|
|
BEESWAX |
30g |
1.50 |
Beeswax block |
Natural lubricant for fine drilling and sawing - ideal for use with whitemetal |
|
|
SOL70 |
25g |
3.00 |
70°C solder |
Lead/cadmium/bismuth alloy - for soldering whitemetal |
|
|
SOL145 |
30g |
3.00 |
145°C solder |
Tin/lead/cadmium alloy - useful for lower temperature detailing work |
|
|
SOL188 |
20g |
3.00 |
188°C solder |
Tin/lead alloy - for general work in brass and nickel silver |
|
|
70219 |
6" x 6" |
19.00 |
Soldering pad - small |
Heat resistant pads for soldering on – components are held in place with pins; wrap in tinfoil and you have a resistance soldering pad! |
|
|
FLUX6 |
100ml |
2.50 |
6% phosphoric acid flux |
Liquid fluxes for soldering whitemetal and brass/copper/nickel silver respectively. Both are available only at exhibitions, and not by mail order |
|
|
BUTANONE |
100ml |
4.75 |
Butanone |
General purpose plastic solvents for modelling. They will both work on ABS plastic as used in some kits. Both are available only at exhibitions, and not by mail order |
|
|
IPA |
100ml |
3.50 |
Propan-2-ol cleaner/degreaser |
Compatible with most modelling plastics; can also be used as a paint stripper. Also known as isopropyl alcohol. Available only at exhibitions, and not by mail order |
|
|
BCBB |
90ml |
9.50 |
Brass Black |
For blackening brass/copper/nickel silver and steel respectively. Both are available only at exhibitions, and not by mail order |
|
© Wizard Models 2010. This page posted
11 July 2010