Sprat
& Winkle Line autocouplings
Autocouplings &
autocoupling starter and trial packs
|
Code |
Quantity |
Price |
Item |
Description |
More info? |
|
ACN/3 |
40 |
7.50 |
N gauge/2mm scale autocoupling fret |
Mk3 type, with mounting plates; couplings give remote delay operation |
|
|
AC3/1 |
40 |
7.50 |
3mm scale & 4mm finescale Mk1 coupling fret |
Original type without the delay facility; 4' minimum radius in 4mm scale |
|
|
AC3/3 |
32 |
7.50 |
3mm & 4mm finescale Mk3 coupling fret |
Delayed action version of the above |
|
|
AC4/1 |
40 |
7.50 |
Standard 4mm scale Mk1 autocoupling fret |
Original type without the delay facility; best for tight 00 curves (less than 2' radius) |
|
|
AC4/3 |
32 |
7.50 |
Standard 4mm scale Mk3 autocoupling fret |
Delayed action version of the above |
|
|
AC7/3 |
22 |
7.50 |
7mm scale Mk3 autocoupling fret |
Delay facility specification for 7mm; recommended 4' minimum radius |
|
|
S/ACN/3 |
40 |
12.50 |
Starter pack for N gauge/2mm scale |
Instructions, diagrams, couplings, wire & 6 magnets to get started |
|
|
T/ACN/3 |
8 |
3.00 |
Trial pack for N gauge/2mm scale |
As above, but with just 8 couplings and 1 magnet; the low-cost way to try out S&W couplings |
|
|
S/AC3/3 |
32 |
12.50 |
Starter pack for 3mm & 4mm finescale |
As above (with 4 magnets) for use with minimum 4' radius curves in 4mm scale |
|
|
T/AC3/3 |
8 |
5.00 |
Trial pack for 4mm finescale |
As above with 8 couplings & mounting plates, 1 magnet; will go down to 2' radius curves |
|
|
S/AC4/3 |
32 |
12.50 |
Stanard 4mm scale starter pack |
As above (with 4 magnets), but for tighter radius curves in 4mm scale |
|
|
T/AC4/3 |
8 |
5.00 |
Standard 4mm scale trial pack |
As above, with 8 couplings, 8 MP4 mounting plates and one magnet |
|
|
S/AC7/3 |
22 |
12.50 |
Starter pack for 0 gauge |
Correct 7mm scale tolerances; with 2 long magnets |
|
|
T/AC7/3 |
8 |
6.50 |
7mm scale trial pack |
As above, with 8 couplings, 8 MP7 mounting plates and one long magnet |
|
Sprat & Winkle coupling
accessories
|
Code |
Quantity |
Price |
Item |
Description |
More info? |
|
MP4 |
32 |
5.00 |
Mounting plates for all AC3 & AC4 types |
Easier mounting on RTR and kit-built 4mm stock, and lets AC3 types be used on tighter curves |
|
|
MP7 |
32 |
5.00 |
Mounting plates for AC7/3 couplings |
Same etch as above, with instructions to suit 7mm couplings and stock |
|
|
2MAG |
4 |
3.00 |
Magnets 14mm long for 2mm scale |
A new smaller magnet for the smaller scale, giving more precise uncoupling |
|
|
4MAG |
4 |
4.00 |
Magnets 25mm long for 3 & 4mm scales |
Suits 4mm cork base; pole pieces are on the long surface for effectiveness |
|
|
7MAG |
2 |
4.00 |
Magnets 41mm long for 7mm scale |
Developed as a result of 0 Gaugers' requests; simplifies shunting |
|
|
PK/MAG |
1 |
5.50 |
Electromagnet for smaller scales |
5mm diameter core; simple installation requiring passing contact switch. |
|
|
SIW4 |
3m |
1.50 |
0.37mm soft iron wire for 3-link chain |
For all smaller scales; use for the last or all 3 links to activate coupling |
|
|
LNK4 |
50 |
4.75 |
4mm scale 3-link loops |
Pre-formed soft iron wire loops for making 3-link droppers |
|
|
SIW7 |
2m |
1.50 |
0.56mm soft iron wire for 0 Gauge links |
Compatible with 7mm links for magnetic attraction of the coupling |
|
|
LNK7 |
40 |
4.75 |
7mm scale 3-link loops |
Pre-formed soft iron wire loops for 7mm scale 3-link droppers |
|
|
BW |
3m |
1.50 |
28swg brass for buffing wire 2/3/4mm |
For buffer or goal-post wire, also for mounting coupling in 2mm scale |
|
|
NSW4 |
3m |
1.50 |
26swg nickel silver wire for mounting |
Mounting wire for 3&4mm couplings; OK for handrails & pick-ups too! |
|
|
2m |
1.50 |
24swg nickel silver wire for mounting |
Use for buffing & mounting wire in 7mm scale; correct diameter for 7mm scale handrails |
|
|
|
LS020 |
1 |
4.00 |
Oak-Hill coupling pole for 0 gauge |
Uniquely designed cast brass head allows simple engagement of 7mm 3-link couplings |
|
|
LS020/1 |
1 |
1.50 |
Oak-Hill coupling pole end |
Solder to a suitable length of rod to make your own coupling pole |
|
|
PLIERS |
1 |
4.95 |
Round-nosed pliers |
Ideal tool for fixing S&W couplings in place on the mounting plates |
|
|
Code |
Quantity |
Price |
Item |
Description |
More info? |
|
DGA |
16 |
2.50 |
Type A – 2mm scale- N gauge |
All packs include 16 couplings, and material to make the loop and dropper wires |
|
|
DGB |
16 |
4.00 |
Type B – 4mm scale – OO/EM/P4 |
For electromagnets, see PK/MAG in the section above |
|
|
DGC |
16 |
4.00 |
Type C – 7mm scale – O gauge |
|
|
|
DGD |
16 |
2.50 |
Type D – TT/OO9 |
|
|
|
DGE |
16 |
3.50 |
Type E – 3mm scale/4mm finescale |
|
|
|
LBJAD |
1 |
3.00 |
Loop bending jig |
Milled brass jig for types A and D |
|
|
LBJBC |
1 |
4.00 |
Loop bending jig |
As above, for types B and C |
|
|
LBJE |
1 |
3.00 |
Loop bending jig |
As above, for type E |
|
|
SWDG |
3m |
1.50 |
Nickel plated steel wire |
30swg wire for making magnetic droppers |
|
|
PBW |
3m |
1.50 |
Phosphor bronze wire |
30swg wire for loops |
|
|
PWC |
10 |
4.00 |
Paul WIndle couplings |
Narrow gauge couplings, compatible with BEMO types. Easily converted to magnetic operation |
|
|
Code |
Quantity |
Price |
Item |
Description |
More info? |
|
TLU |
1 |
8.95 |
Tension lock uncoupler for OO/HO |
Solenoid-operated ramp; requires 12V dc supply (by Gaugemaster) |
|
|
4151 |
10 pairs |
6.60 |
4mm scale three link couplings |
Etched brass hooks and steel links, complete with springs (by Slater's) |
|
|
LP1 |
4 pairs |
4.95 |
4mm scale three-link couplings |
Blackened etched brass hooks and brass links, complete with springs and split pins; for unfitted wagons and locos (by Smiths) |
|
|
LP2 |
4 pairs |
4.95 |
4mm scale instanter couplings |
As above, but with instanter type middle link for fitted wagons (by Smiths) |
|
|
LP3F |
24 |
3.50 |
Steel links |
Replacement bottom links for LP1, 2, 4 & 6, for use with magnetic uncoupling poles (by Smiths) |
|
|
LP4 |
4 pairs |
8.00 |
4mm scale three-link couplings |
As LP1 above, but pre-assembled for your convenience (by Smiths) |
|
|
LP5 |
2 pairs |
8.00 |
4mm scale dummy screw couplings |
Pre-assempled screw couplings, for fitted stock (by Smiths) |
|
|
LP6 |
4 pairs |
8.00 |
4mm scale instanter couplings |
Pre-assembled version of LP2 above (by Smiths) |
|
|
LP8 |
4 pairs |
6.00 |
4mm scale dummy screw couplings |
Self-assembly form of LP5 above (by Smiths) |
|
|
SA20 |
20 |
2.95 |
Coupling springs |
Spare compression springs for LP1-8 above (by Smiths) |
|
|
SA21 |
20 |
2.95 |
Split pins |
Spare split pins for LP1-8 above (by Smiths) |
|
|
M7023 |
1 pair |
7.90 |
7mm scale screw couplings |
Working screw couplings for most locos, coaches and some fitted wagons (by Slater's) |
|
|
M7025 |
1 pair |
5.25 |
7mm scale instanter couplings |
For fitted wagons; etched brass hook, cast brass instanter link (by Slater's) |
|
|
M7027 |
1 pair |
5.80 |
7mm scale SR/BR buckeye coach couplings |
Dummy brass castings; functional single link couplings included (by Slater's) |
|
|
7155 |
1 pair |
3.70 |
7mm scale 3-link couplings |
For unfitted locos and rolling stock; etched brass hook, steel links (by Slater's) |
|
© Wizard Models 2008. This page
posted 1 October 2008