C+L
Finescale and Carr’s items
Please note
that I am no longer re-ordering C+L/Carr's products. Only the items shown on
this page remain in stock, in the quantities shown, so buy now!
4mm scale
|
Code |
Quantity |
Price |
Item |
No. left |
Description |
|
4CC106C |
1 |
12.00 |
Nickel silver P4 1:6 crossing |
1 |
Ready-to-lay vee and wing rail assembly in Code 75 bullhead rail. The vee rails are generously sized for easier crossover construction. |
|
4CHB02A |
10 |
4.50 |
2
bolt cast brass chairs |
1 2 |
Cast brass chairs for use with BS95R Code 75 bullhead rail and PCB sleepers where extra strength is required, such as at baseboard joints. Four-bolt chairs were common on the MR, GER and some other pre-Grouping companies, whilst 2-bolt chairs were used on the GWR. |
|
4CV104B |
1 |
7.00 |
Steel
1:4 crossing vee |
1 1 1 1 |
Pre-assembled crossing vees in BS95R Code 75 bullhead rail. They are soldered using 227° solder, so please bear this in mind when making electrical connections, or soldering them to PCB sleepers or rivets. |
|
4RA101C |
10m |
9.00 |
Nickel silver flat bottom rail |
2 |
BS110A Code 82 flat bottom rail. Special postal rates apply, so please ask before ordering, or arrange to collect at an exhibition. |
|
4ST106 |
1 set |
7.00 |
Steel
1:6 switch & vee set |
1 1 |
The economical alternative to the switches and vees listed above. The switches have been milled but not finished, and the two halves of the vee are also milled, but not soldered together. |
|
EMAAA |
32 |
14.00 |
EM
template set |
1 1 2 1 7 3 4 6 2 3 |
The sets contain a range of turnout sizes, crossings and slips, whilst the single templates provide an economical alternative for the modeller new to track construction who just wants "to have a go" |
7mm scale
|
Code |
Quantity |
Price |
Item |
No. left |
Description |
|
F7B6L |
1 |
1.50 |
32mm
gauge B6 LH template |
1 2 |
|
Carr’s items
for all scales
All Carr’s items
are now sold out.
© Wizard Models 2008. This page posted 20
October 2008